201e-18 is the housing for the modular system, consisting of three sections. The sections are joined together by side walls made of laminate and can accommodate up to 18 modules of the 200e series. For the convenience of transportation, the housing can...
The folding housing of Buchla 201e-12 consists of three sub-housings, each of which can accommodate up to four modules of the 200e series. The side walls of the case are made of high-quality hardwood laminate. There’s an external switched-mode power supply.
The body consists of two five-panel sections, which are joined together by side walls made of laminate. For transport, the body can be folded, without having to remove the patch cords from the connectors. For power supply, one external switching power...
297 module is assembled according to an analog circuit and is not a representative of the "e" family. It represents the classic phase shift effect with advanced tuning and modulation capabilities. The module is divided into seven sections: Input section,...
281h module is the half of Buchla 281e, which has taken the functionality from its elder brother. Three functional modes are available for function generators: /// - in this mode the unit enters the self-generation and that’s how you get an LFO. In this...
281e contains four identical function generators, an external pulse activates the attack-decay cycle. After the cycle is completed, the pulse is available at the output. Three operating modes are available for each generator: /// - in this mode the unit...
272e module consists of four FM radio stereo transmitters. Each receiver has an independent stereo output and frequency tuning control, which can be changed by CV signals. There is a sample&hold function, also controlled by an external signal. The...
267e is designed to perform three functions: noise generation, randomization of CV signals and band-pass filtering of audio signals. The noise generator has three outputs: 3 dB / oct - white noise; -3 dB / oct - white noise with low spectral shift; Flat...
Buchla 259e is a system of two oscillators: a complex waveform generator and a modulation generator. The Principal Oscillator can produce signals within nine octaves. Two wavetables are used to construct the signals. Voices can be selected from banks:...
Buchla 256e is represented with 4 identical functional blocks designed for: scaling, inverting, combining, multiplication of control voltages (CV). Each unit has two inputs, the mixing of signals is regulated by one knob. There is also an "in select"...
