There are two high-quality linear VCAs (voltage controlled amplifier) in the module. For each of the VCA, a separate control input with an adjustable attenuator and a passthru are provided. The presence of a mix output allows the module to be used as a two-channel controlled mixer.
Detect is a small module (6HP) designed to generate control signals from an audio signal. Two CV signals at the output of the block: ENV (envelope signal) and GATE (pulse waveform). For the envelope detector, attack and decay settings are available. The...
Crush is an analog bitcrusher, an effect that simulates the degradation of a signal when the sample rate decreases. The effect is based on the quantization of a signal with a specified frequency, which is set manually or via CV input. The ratio of the...
Chain reactor is represented with four independent LFOs enclosed in one case. The first two oscillators are VILFO (pittsburgh modular vilfo), unique modulatable LFOs. For each of them an inf CV and ws CV is provided. Frequency, external source depth and...
ADSR launched by Pittsburg Modular is a classic envelope generator with four parameters: attack, decay, sustain and release. A two-position switch sets the generator time limit. A red indicator is provided for visualizing the operation of the module. The module is designed in a strict vintage style.
The case of Buchla format for desktop use. It can accommodate LEM3, LEM4, LEM7 or any other set of 200/200e series modules. An external switched mode power supply is used, which comes with a set of adapters for different types of networks (USA, Japan, Europe).
Lower or upper part for building up an 18 panel system 200e. It does not have its own power supply, therefore it is necessary to connect it to the "active housing" (201e-6 Powered Boat) to make the modules operate.
Lower or upper part for building up a 12 panel system 200e. Accomodates up to 4 modules. This case is mountable in a standard 19" rack. It does not have its own power supply, therefore it is necessary to connect it to the "active housing" (201e-4 Powered Boat) so that the modules could operate.
201e-4 is the central part for building up a 12 panel system 200e. Can accommodate up to 4 modules. There is a power distributor onboard, the power unit itself is external. The switched mode power supply 12V comes with a set of adapters for working with...
201e-3 is designed for fastening the keyboard, which connects to 223e module. It is a metal plate with a frame made of natural wood.
