c cortirovkoy popularity
Crush is an analog bitcrusher, an effect that simulates the degradation of a signal when the sample rate decreases. The effect is based on the quantization of a signal with a specified frequency, which is set manually or via CV input. The ratio of the...
The four-channel mixer or 4 independent attenuators. Can be used for both audio signals and CV control signals. An independent level controller is provided for each channel. The circuit allows using any of the first three channels as an independent...
Detect is a small module (6HP) designed to generate control signals from an audio signal. Two CV signals at the output of the block: ENV (envelope signal) and GATE (pulse waveform). For the envelope detector, attack and decay settings are available. The...
Three convenient mini modules enclosed in one housing. In the upper part is a passive signal propagator. It is represented with four parallel connectors, which allow you to send one signal assigning it into three routings. In the middle and bottom part...
The module consists of three independent function blocks: Glide - the limiter (or portamento, or lag-processor). The "TIME" knob adjusts the rise time of the signal.Sample & hold - contains an analog noise generator and a sample&hold circuit. The...
Mix Mult consists of two functional units: a three-channel mixer and two signal multipliers. Each mixer channel has its own gain control. Channels 1 and 2 have independent outputs with the function of disconnecting from the mixer, which allows them to be...
The module is designed as an "extreme" block of the modular system, its purpose is to output the generated synth sound. Outs has two independent inputs, which allows the module to be used not only as a stereo, but as a dual mono. If the signal cable is...
InOut is an I/O module for the modular system. In the upper part of the housing there is an output unit. It has two 1/8" inputs and an adjustable 1/4" output jack. This sub-unit can serve to match the output of the modular synthesizer with the line input...
Analog Voltage Controlled Oscillator (VCO). Oscillator v1 can produce four sound waves within a five-octave range. Control is carried out according to the standard 1 Volt per octave. For each waveform (sine, triangle, saw, square) an individual output is...
Game system is a sequencer of CV and gate signals with control via joystick and buttons. The module contains six pre-installed "games", each of which contains an individual type of sequencing: from a standard step sequencer to a chaotic set of CV and...
