Synthesizer Box is a semi-modular analog synthesizer in the Eurorack format. It is very suitable as the prime modular synthesizer: all basic connections are already routed – “plug and play” kind of thing. All the main function blocks have their...
Oscillator v2 is a compact analog voltage controlled oscillator (VCO). It is built on the same principle as its big brother was. The module is controlled by a 1-volt signal per octave and can play notes within a 5-octave range. A coarse and fine tuning...
InOut is an I/O module for the modular system. In the upper part of the housing there is an output unit. It has two 1/8" inputs and an adjustable 1/4" output jack. This sub-unit can serve to match the output of the modular synthesizer with the line input...
Envelope is an analog function generator which can be used in a variety of ways: attack-decay (AD) envelope, attack-sustain-release (ASR), attack-release (AR), LFO, output voltage limiter, wave shaper. The attack time is set by the regulator or an...
There are two high-quality linear VCAs (voltage controlled amplifier) in the module. For each of the VCA, a separate control input with an adjustable attenuator and a passthru are provided. The presence of a mix output allows the module to be used as a two-channel controlled mixer.
Crush is an analog bitcrusher, an effect that simulates the degradation of a signal when the sample rate decreases. The effect is based on the quantization of a signal with a specified frequency, which is set manually or via CV input. The ratio of the...
Analog Replicator is a delay built on two BBD chips. Delay is conventionally considered to be analog, since the BBD (Bucket Brigade Device) technology is something between the analogue and the digital (the signal is discretized in time, but not quantized...
ADSR launched by Pittsburg Modular is a classic envelope generator with four parameters: attack, decay, sustain and release. A two-position switch sets the generator time limit. A red indicator is provided for visualizing the operation of the module. The module is designed in a strict vintage style.
297 module is assembled according to an analog circuit and is not a representative of the "e" family. It represents the classic phase shift effect with advanced tuning and modulation capabilities. The module is divided into seven sections: Input section,...
Buchla 292e is a multifunctional module that can be used as a voltage controlled amplifier (VCA), a controlled filter (VCF) or a mixer. Switching the operating mode of each of the four channels is managed with a button. Available modes: Low-pass is a...
