c cortirovkoy rated Members
297 module is assembled according to an analog circuit and is not a representative of the "e" family. It represents the classic phase shift effect with advanced tuning and modulation capabilities. The module is divided into seven sections: Input section,...
281h module is the half of Buchla 281e, which has taken the functionality from its elder brother. Three functional modes are available for function generators: /// - in this mode the unit enters the self-generation and that’s how you get an LFO. In this...
281e contains four identical function generators, an external pulse activates the attack-decay cycle. After the cycle is completed, the pulse is available at the output. Three operating modes are available for each generator: /// - in this mode the unit...
272e module consists of four FM radio stereo transmitters. Each receiver has an independent stereo output and frequency tuning control, which can be changed by CV signals. There is a sample&hold function, also controlled by an external signal. The...
267e is designed to perform three functions: noise generation, randomization of CV signals and band-pass filtering of audio signals. The noise generator has three outputs: 3 dB / oct - white noise; -3 dB / oct - white noise with low spectral shift; Flat...
Buchla 259e is a system of two oscillators: a complex waveform generator and a modulation generator. The Principal Oscillator can produce signals within nine octaves. Two wavetables are used to construct the signals. Voices can be selected from banks:...
Buchla 256e is represented with 4 identical functional blocks designed for: scaling, inverting, combining, multiplication of control voltages (CV). Each unit has two inputs, the mixing of signals is regulated by one knob. There is also an "in select"...
252e is an original generator of patterns. The front panel is mostly represented with a round display, it shows the parts of the rhythmic sequences in the form of eleven rings with the number of steps from 3 to 16. Each channel has its own color. The...
Buchla 251e is represented with four 50-step sequencers. Each of them has independent outputs (pulse and CV) and control inputs (start/stop). The parameters of each sequencer are programmed in series through the SEQ edit and STAGE edit. All the...
250e module is a 16-step sequencer. Each step contains two parameters controlled by potentiometers. The parameters of each step can be interpolated, quantized, or replaced by external CV signals. The current step is indicated by the corresponding...
