Your search criteria
Available options: Usage Design/ Form Factor: Sound Module
c cortirovkoy cost {most expensive first}
found following products (116):
Roland TORCIDO Distortion 300.00 U.S.Dollars
Torcido is a digital stereo distortion processor of the AIRA line. Like all representatives of the AIRA series, Torcido is Eurorack mountable and can be used as a desktop module. Five controllers are provided for setting the processor: volume, tone,...
Roland SYS-521 SYSTEM-500 VCF 300.00 U.S.Dollars
Two independent filters are placed in one 521 module. A voltage controlled filter can serve not only for signal frequency correction, but also for obtaining various "wobble", "quacks" and so on. Each of the filters has three inputs for signals with...
Roland SYS-530 SYSTEM-500 DUAL VCA 300.00 U.S.Dollars
SYSTEM-500 530 DUAL VCA - two Voltage Controlled Amplifiers in one housing. In fact the unit represents two three-channel mixers. The control of the input signal level is carried out with small faders. With the same faders, the mixing of the control...
Scatter + Looper = Scooper is a digital processor made by Roland. The module is designed for creating and processing loops in real time. Digital controllers have a resolution of 16 million values, which allows you to fine-tune all the effect parameters....
Demora is flexible digital (24bit/96kHz) delay made by Roland corporation. The module is encased within a metal housing, which can be both mounted into Eurorack and installed into a pedalboard. Two independent mono inputs and outputs allow the processor...
Roland BITRAZER Bit Crusher 300.00 U.S.Dollars
Bitrazer is a digital module combining the bit crush effect with an LP/HP filter. To adjust the effect, bit down control and sample rate are provided. If both these controls are set to the maximum value - the signal will pass through the module with no...
Roland SYS-512 SYSTEM-500 DUAL VCO 300.00 U.S.Dollars
512 DUAL VCOs are represented with two independent voltage controlled oscillators (VCOs) combined in one module. Each oscillator has its own input for the keyboard and two for modulation signals. The inputs are designed for 1V/oct signal. You can switch...
Time Runner is a pattern generator that can also be used as a rhythm divider. The clock signal can come from the built-in oscillator or from the external source. This signal is fed to four channels, which divide by 2, 4, 8 and 16. Each channel has two...
Game system is a sequencer of CV and gate signals with control via joystick and buttons. The module contains six pre-installed "games", each of which contains an individual type of sequencing: from a standard step sequencer to a chaotic set of CV and...
Buchla LEM PB Powered 3 Boat 299.00 U.S.Dollars
The case of Buchla format for desktop use. It can accommodate LEM3, LEM4, LEM7 or any other set of 200/200e series modules. An external switched mode power supply is used, which comes with a set of adapters for different types of networks (USA, Japan, Europe).