c cortirovkoy rated Members
The module is designed as an "extreme" block of the modular system, its purpose is to output the generated synth sound. Outs has two independent inputs, which allows the module to be used not only as a stereo, but as a dual mono. If the signal cable is...
99.00
Oscillator v2 is a compact analog voltage controlled oscillator (VCO). It is built on the same principle as its big brother was. The module is controlled by a 1-volt signal per octave and can play notes within a 5-octave range. A coarse and fine tuning...
199.00
Multiple consists of two identical splitters. The audio or CV signal fed into the splitter is duplicated at the three outputs, and thus one signal can be routed on three different modules. The module does not require power and is small in size (only 2HP).
29.00
Mix Mult consists of two functional units: a three-channel mixer and two signal multipliers. Each mixer channel has its own gain control. Channels 1 and 2 have independent outputs with the function of disconnecting from the mixer, which allows them to be...
89.00
The four-channel mixer or 4 independent attenuators. Can be used for both audio signals and CV control signals. An independent level controller is provided for each channel. The circuit allows using any of the first three channels as an independent...
89.00
