c cortirovkoy rated Members
ADSR launched by Pittsburg Modular is a classic envelope generator with four parameters: attack, decay, sustain and release. A two-position switch sets the generator time limit. A red indicator is provided for visualizing the operation of the module. The module is designed in a strict vintage style.
Lower or upper part for building up an 18 panel system 200e. It does not have its own power supply, therefore it is necessary to connect it to the "active housing" (201e-6 Powered Boat) to make the modules operate.
Lower or upper part for building up a 12 panel system 200e. Accomodates up to 4 modules. This case is mountable in a standard 19" rack. It does not have its own power supply, therefore it is necessary to connect it to the "active housing" (201e-4 Powered Boat) so that the modules could operate.
201e-4 is the central part for building up a 12 panel system 200e. Can accommodate up to 4 modules. There is a power distributor onboard, the power unit itself is external. The switched mode power supply 12V comes with a set of adapters for working with...
297 module is assembled according to an analog circuit and is not a representative of the "e" family. It represents the classic phase shift effect with advanced tuning and modulation capabilities. The module is divided into seven sections: Input section,...
281h module is the half of Buchla 281e, which has taken the functionality from its elder brother. Three functional modes are available for function generators: /// - in this mode the unit enters the self-generation and that’s how you get an LFO. In this...
281e contains four identical function generators, an external pulse activates the attack-decay cycle. After the cycle is completed, the pulse is available at the output. Three operating modes are available for each generator: /// - in this mode the unit...
272e module consists of four FM radio stereo transmitters. Each receiver has an independent stereo output and frequency tuning control, which can be changed by CV signals. There is a sample&hold function, also controlled by an external signal. The...
267e is designed to perform three functions: noise generation, randomization of CV signals and band-pass filtering of audio signals. The noise generator has three outputs: 3 dB / oct - white noise; -3 dB / oct - white noise with low spectral shift; Flat...
Buchla 259e is a system of two oscillators: a complex waveform generator and a modulation generator. The Principal Oscillator can produce signals within nine octaves. Two wavetables are used to construct the signals. Voices can be selected from banks:...
