c cortirovkoy rated Members
The velocity sensitive keyboard built on capacitive technology. It operates in the format of 1 volt per octave, has thirteen keys with the ability to transpose within seven octaves. Using the "MODE" button, one of the four basic operating modes is...
Analog Voltage Controlled Oscillator (VCO). Oscillator v1 can produce four sound waves within a five-octave range. Control is carried out according to the standard 1 Volt per octave. For each waveform (sine, triangle, saw, square) an individual output is...
Waveforms Oscillator is the analog oscillator (VCO) with multiple outputs and the possibility of modulation. Waveforms is designed to work with 1V/octave signals, and notes can be played within five octaves. Unlike vintage VCO, the module has good...
Verbtronic is a digital mono echo effect. It has two modes of operation: "verb" and "tronic". Verb creates a short echo with a small number of reflections. Tronic is a specific long soaring echo effect. The "tonal tilt" control is a kind of equalizer...
The module consists of three independent function blocks: Glide - the limiter (or portamento, or lag-processor). The "TIME" knob adjusts the rise time of the signal.Sample & hold - contains an analog noise generator and a sample&hold circuit. The...
Time Runner is a pattern generator that can also be used as a rhythm divider. The clock signal can come from the built-in oscillator or from the external source. This signal is fed to four channels, which divide by 2, 4, 8 and 16. Each channel has two...
Synthesizer Box is a semi-modular analog synthesizer in the Eurorack format. It is very suitable as the prime modular synthesizer: all basic connections are already routed – “plug and play” kind of thing. All the main function blocks have their...
The module is designed for routing and mixing audio and/or control signals. Each of the four channels can be manually switched by the on/off switch or by the control signal received by the Gate In. The signal sent to the input can be sent to bus A and/or...
The sequencer can play sequences of 4, 6 or 8 steps (depends on the position of the switch). In order to move from step to step, the timing signal routed to the "CLK" input can be used. It can be a square wave or a gate signal. For the construction of...
The Phase Shifter module is an analogue 16-step phaser. In addition to the output at the sixteenth stage, there’s another mix (dry/wet) is provided after the eight one. In addition, there are outputs after the seventh and fifteenth steps which allow no...
