c cortirovkoy popularity
The Buchla 225h is basically 202h module with the only difference: the "pulse conv" block is replaced with the "MIDI outputs" block. The converter allows you to convert a MIDI signal into control signal (pitch, note on, bend, mod wheel, aftertouch,...
The Dreadbox Attenuator is a modular Eurorack synthesizer module designed to add expression and control to your Eurorack system. It is a 4-channel voltage-controlled attenuator with a range of 0-5V and a maximum current draw of 20mA per channel. It is...
272e module consists of four FM radio stereo transmitters. Each receiver has an independent stereo output and frequency tuning control, which can be changed by CV signals. There is a sample&hold function, also controlled by an external signal. The...
The Buchla 210e is designed for routing control signals and audio signals. The device allows you to reduce the number of patch cables, and the configured combinations of inputs and outputs can be saved in patches. Eight audio inputs can be assigned to...
The module is designed as an "extreme" block of the modular system, its purpose is to output the generated synth sound. Outs has two independent inputs, which allows the module to be used not only as a stereo, but as a dual mono. If the signal cable is...
227e is a combination of three functional blocks: master mixer, microphone preamplifier, sub-mixer. The master mixer has four independent inputs with individual gain adjustment. The "spatial dynamics" function determines the position of the source in a...
The endorphin.es Cockpit is a modular Eurorack case designed to be the centerpiece of a modular synthesizer system. It features an integrated power supply, a built-in mixer, and a series of patch points that allow for easy and convenient patching of...
InOut is an I/O module for the modular system. In the upper part of the housing there is an output unit. It has two 1/8" inputs and an adjustable 1/4" output jack. This sub-unit can serve to match the output of the modular synthesizer with the line input...
Buchla 259e is a system of two oscillators: a complex waveform generator and a modulation generator. The Principal Oscillator can produce signals within nine octaves. Two wavetables are used to construct the signals. Voices can be selected from banks:...
281h module is the half of Buchla 281e, which has taken the functionality from its elder brother. Three functional modes are available for function generators: /// - in this mode the unit enters the self-generation and that’s how you get an LFO. In this...
