c cortirovkoy cost {cheapest first}
Buchla 292e is a multifunctional module that can be used as a voltage controlled amplifier (VCA), a controlled filter (VCF) or a mixer. Switching the operating mode of each of the four channels is managed with a button. Available modes: Low-pass is a...
267e is designed to perform three functions: noise generation, randomization of CV signals and band-pass filtering of audio signals. The noise generator has three outputs: 3 dB / oct - white noise; -3 dB / oct - white noise with low spectral shift; Flat...
The mixer has six mono inputs and one stereo output. Each input has a level and panning adjustment. Moreover, at four inputs the panning can be adjusted manually, and the two remaining ones are CV inputs. Also, the module is equipped with an output for...
Buchla 256e is represented with 4 identical functional blocks designed for: scaling, inverting, combining, multiplication of control voltages (CV). Each unit has two inputs, the mixing of signals is regulated by one knob. There is also an "in select"...
272e module consists of four FM radio stereo transmitters. Each receiver has an independent stereo output and frequency tuning control, which can be changed by CV signals. There is a sample&hold function, also controlled by an external signal. The...
297 module is assembled according to an analog circuit and is not a representative of the "e" family. It represents the classic phase shift effect with advanced tuning and modulation capabilities. The module is divided into seven sections: Input section,...
The frequency shifter and balanced modulator are two independent functional units integrated in the Buchla 285e housing. Frequency Shifter is designed to shift the input signal to an arbitrary frequency. The offset frequency can be set from the internal...
225e is designed to convert MIDI commands into Buchla control signals (pulse voltage and CV). The outputs of the converter are combined into control buses. The first four buses (A-D) are internal and serve to control the modules 281e, 292e, 259e and...
At the top of 257e there are two CV processors. Functionally they are the same as in 256e with the only difference that they have one input and, accordingly, there is no CV mixer. It is possible to set the minimum and maximum value of the control signal,...
Buchla 251e is represented with four 50-step sequencers. Each of them has independent outputs (pulse and CV) and control inputs (start/stop). The parameters of each sequencer are programmed in series through the SEQ edit and STAGE edit. All the...
