c cortirovkoy rated Members
The four-channel mixer or 4 independent attenuators. Can be used for both audio signals and CV control signals. An independent level controller is provided for each channel. The circuit allows using any of the first three channels as an independent...
The module serves to convert MIDI events to CV control signals. In MIDI3 3 modes are available: Monophonic mode - MIDI notes are translated into CV and gate signals and get output to channels 1 and 2 simultaneously. Three priority modes for notes are...
The analog module based on a resistive optocoupler is designed to simulate the characteristics of natural instruments (violins, wind instruments, guitars, etc.). It is known that natural instruments tend to change the harmonic composition depending on...
The two low-frequency oscillators are combined simultaneously within one housing, each having its own peculiarities. There’s LFO1 at the top of the module. The generation frequency is set by the large "frequency" knob and is indicated by a flashing red...
InOut is an I/O module for the modular system. In the upper part of the housing there is an output unit. It has two 1/8" inputs and an adjustable 1/4" output jack. This sub-unit can serve to match the output of the modular synthesizer with the line input...
Game system is a sequencer of CV and gate signals with control via joystick and buttons. The module contains six pre-installed "games", each of which contains an individual type of sequencing: from a standard step sequencer to a chaotic set of CV and...
Analog multifunctional voltage-controlled filter, based on SVR (State Variable Filter) technology. It has four filters with individual outputs: low pass, band pass, high frequency (high pass) and a notch filter. Notch filter can have the characteristic...
Envelope is an analog function generator which can be used in a variety of ways: attack-decay (AD) envelope, attack-sustain-release (ASR), attack-release (AR), LFO, output voltage limiter, wave shaper. The attack time is set by the regulator or an...
There are two high-quality linear VCAs (voltage controlled amplifier) in the module. For each of the VCA, a separate control input with an adjustable attenuator and a passthru are provided. The presence of a mix output allows the module to be used as a two-channel controlled mixer.
Detect is a small module (6HP) designed to generate control signals from an audio signal. Two CV signals at the output of the block: ENV (envelope signal) and GATE (pulse waveform). For the envelope detector, attack and decay settings are available. The...
