c cortirovkoy cost {cheapest first}
Sound Module/ Tone Generator, Analogue (A), Voices: 8, Monotimbral, Oscillators per voice: 3, Oscillators' hard sync.
Multiple consists of two identical splitters. The audio or CV signal fed into the splitter is duplicated at the three outputs, and thus one signal can be routed on three different modules. The module does not require power and is small in size (only 2HP).
Three convenient mini modules enclosed in one housing. In the upper part is a passive signal propagator. It is represented with four parallel connectors, which allow you to send one signal assigning it into three routings. In the middle and bottom part...
Stylophone GEN X-1 is a revised version of the famous portable synth by Dubreq. The tiny instrument will serve as a huge package of features with which you can alter the sound in multiple ways. Tweak and twist the signal creating beats and eccentric...
Mix Mult consists of two functional units: a three-channel mixer and two signal multipliers. Each mixer channel has its own gain control. Channels 1 and 2 have independent outputs with the function of disconnecting from the mixer, which allows them to be...
The four-channel mixer or 4 independent attenuators. Can be used for both audio signals and CV control signals. An independent level controller is provided for each channel. The circuit allows using any of the first three channels as an independent...
The analog overdrive effect taken from Abyss synthesizer.
The module is designed as an "extreme" block of the modular system, its purpose is to output the generated synth sound. Outs has two independent inputs, which allows the module to be used not only as a stereo, but as a dual mono. If the signal cable is...
The two low-frequency oscillators are combined simultaneously within one housing, each having its own peculiarities. There’s LFO1 at the top of the module. The generation frequency is set by the large "frequency" knob and is indicated by a flashing red...
InOut is an I/O module for the modular system. In the upper part of the housing there is an output unit. It has two 1/8" inputs and an adjustable 1/4" output jack. This sub-unit can serve to match the output of the modular synthesizer with the line input...
