The central part for building up an 18 panel system 200e. There is a power distributor onboard, the power unit itself is external. The switched mode power supply 12V comes with a set of adapters for working with any standard of networks (USA, Europe, Japan).
Lower or upper part for building up an 18 panel system 200e. It does not have its own power supply, therefore it is necessary to connect it to the "active housing" (201e-6 Powered Boat) to make the modules operate.
Buchla 202h is a true "wand" for the owners of modular systems in the Eurorack format - a set of utilities as the manufacturer entitled it. The module consists of three blocks: ADAPT - a set of adapters (3.5 TRS in 6.35 TRS, TINI-cable, etc.). CV PROC -...
The mixer has six mono inputs and one stereo output. Each input has a level and panning adjustment. Moreover, at four inputs the panning can be adjusted manually, and the two remaining ones are CV inputs. Also, the module is equipped with an output for...
Buchla developers always try to meet all possible user requests. 207e module combined the mixer and an unprecedented for modular synthesizers microphone preamplifier. The mixer is the same as in the 206e model. It has six mono channels with volume and...
The Buchla 210e is designed for routing control signals and audio signals. The device allows you to reduce the number of patch cables, and the configured combinations of inputs and outputs can be saved in patches. Eight audio inputs can be assigned to...
Module 223e is designed to process signals coming from an external controller (222e). The controller 222e features 27 velocity sensitive pads. The signal coming from 222e is converted in module 223e into a plurality of separate control signals (CV) and...
225e is designed to convert MIDI commands into Buchla control signals (pulse voltage and CV). The outputs of the converter are combined into control buses. The first four buses (A-D) are internal and serve to control the modules 281e, 292e, 259e and...
The Buchla 225h is basically 202h module with the only difference: the "pulse conv" block is replaced with the "MIDI outputs" block. The converter allows you to convert a MIDI signal into control signal (pitch, note on, bend, mod wheel, aftertouch,...
226h module is a six-channel converter of control signals into MIDI events. For each channel, 4 parameters are provided: note on, pitch, velocity and assignable count cntrl. Thus, if you use 226h and 225h simultaneously, you can build a reliable and...
