At the top of 257e there are two CV processors. Functionally they are the same as in 256e with the only difference that they have one input and, accordingly, there is no CV mixer. It is possible to set the minimum and maximum value of the control signal,...
1 449.00
297 module is assembled according to an analog circuit and is not a representative of the "e" family. It represents the classic phase shift effect with advanced tuning and modulation capabilities. The module is divided into seven sections: Input section,...
1 399.00
The frequency shifter and balanced modulator are two independent functional units integrated in the Buchla 285e housing. Frequency Shifter is designed to shift the input signal to an arbitrary frequency. The offset frequency can be set from the internal...
1 399.00
225e is designed to convert MIDI commands into Buchla control signals (pulse voltage and CV). The outputs of the converter are combined into control buses. The first four buses (A-D) are internal and serve to control the modules 281e, 292e, 259e and...
1 399.00
272e module consists of four FM radio stereo transmitters. Each receiver has an independent stereo output and frequency tuning control, which can be changed by CV signals. There is a sample&hold function, also controlled by an external signal. The...
1 249.00
