Torcido is a digital stereo distortion processor of the AIRA line. Like all representatives of the AIRA series, Torcido is Eurorack mountable and can be used as a desktop module. Five controllers are provided for setting the processor: volume, tone,...
Two independent filters are placed in one 521 module. A voltage controlled filter can serve not only for signal frequency correction, but also for obtaining various "wobble", "quacks" and so on. Each of the filters has three inputs for signals with...
SYSTEM-500 530 DUAL VCA - two Voltage Controlled Amplifiers in one housing. In fact the unit represents two three-channel mixers. The control of the input signal level is carried out with small faders. With the same faders, the mixing of the control...
The analog module 540 of the new System-500 comprises two independent envelope generator units and one low frequency oscillator unit. The envelope generator provides control of ADSR parameters (attack, decay, sustain, release) - this allows receiving...
The module 572 combines three independent blocks - Delay, Phaser and Low Frequency Oscillator. The five-stage phaser has frequency and resonance tuning. There are two inputs for external control signals (CV), which can control the ratio of the dry signal...
Scatter + Looper = Scooper is a digital processor made by Roland. The module is designed for creating and processing loops in real time. Digital controllers have a resolution of 16 million values, which allows you to fine-tune all the effect parameters....
Demora is flexible digital (24bit/96kHz) delay made by Roland corporation. The module is encased within a metal housing, which can be both mounted into Eurorack and installed into a pedalboard. Two independent mono inputs and outputs allow the processor...
Bitrazer is a digital module combining the bit crush effect with an LP/HP filter. To adjust the effect, bit down control and sample rate are provided. If both these controls are set to the maximum value - the signal will pass through the module with no...
512 DUAL VCOs are represented with two independent voltage controlled oscillators (VCOs) combined in one module. Each oscillator has its own input for the keyboard and two for modulation signals. The inputs are designed for 1V/oct signal. You can switch...
The Roland 555 is a drum machine produced by the Japanese company Roland. It was released in 1988 and is the predecessor to the popular Roland TR-909 drum machine. The Roland 555 features 16-bit samples and 12-bit analog synthesis, allowing users to...
