The analog module based on a resistive optocoupler is designed to simulate the characteristics of natural instruments (violins, wind instruments, guitars, etc.). It is known that natural instruments tend to change the harmonic composition depending on...
Analog multifunctional voltage-controlled filter, based on SVR (State Variable Filter) technology. It has four filters with individual outputs: low pass, band pass, high frequency (high pass) and a notch filter. Notch filter can have the characteristic...
Crush is an analog bitcrusher, an effect that simulates the degradation of a signal when the sample rate decreases. The effect is based on the quantization of a signal with a specified frequency, which is set manually or via CV input. The ratio of the...
Buchla 201e-3 Passive Frame 199.00 U.S.Dollars
201e-3 is designed for fastening the keyboard, which connects to 223e module. It is a metal plate with a frame made of natural wood.
Analog Voltage Controlled Oscillator (VCO). Oscillator v1 can produce four sound waves within a five-octave range. Control is carried out according to the standard 1 Volt per octave. For each waveform (sine, triangle, saw, square) an individual output is...
endorphin.es Cockpit 4 Stereo Channels Performance Mixer 220.00 U.S.Dollars
The endorphin.es Cockpit is a modular Eurorack case designed to be the centerpiece of a modular synthesizer system. It features an integrated power supply, a built-in mixer, and a series of patch points that allow for easy and convenient patching of...
Generator is a kind of a double voltage-controlled oscillator. It does not conform to the 1 volt per octave, and also has no temperature compensation. These factors limit the use of the oscillator, but allow you to create complex FM tones and atonal drum...
The module is designed for routing and mixing audio and/or control signals. Each of the four channels can be manually switched by the on/off switch or by the control signal received by the Gate In. The signal sent to the input can be sent to bus A and/or...
The module serves to convert MIDI events to CV control signals. In MIDI3 3 modes are available: Monophonic mode - MIDI notes are translated into CV and gate signals and get output to channels 1 and 2 simultaneously. Three priority modes for notes are...
Waldorf NW1 Wavetable Module 240.00 U.S.Dollars
The Waldorf NW1 is a wavetable synthesizer module from the German company Waldorf. It is a Eurorack-sized module that can be used to create a wide range of sounds. It features a variety of waveforms, modulation sources, and effects, as well as a...