250e module is a 16-step sequencer. Each step contains two parameters controlled by potentiometers. The parameters of each step can be interpolated, quantized, or replaced by external CV signals. The current step is indicated by the corresponding...
The folding housing of Buchla 201e-12 consists of three sub-housings, each of which can accommodate up to four modules of the 200e series. The side walls of the case are made of high-quality hardwood laminate. There’s an external switched-mode power supply.
252e is an original generator of patterns. The front panel is mostly represented with a round display, it shows the parts of the rhythmic sequences in the form of eleven rings with the number of steps from 3 to 16. Each channel has its own color. The...
267e is designed to perform three functions: noise generation, randomization of CV signals and band-pass filtering of audio signals. The noise generator has three outputs: 3 dB / oct - white noise; -3 dB / oct - white noise with low spectral shift; Flat...
225e is designed to convert MIDI commands into Buchla control signals (pulse voltage and CV). The outputs of the converter are combined into control buses. The first four buses (A-D) are internal and serve to control the modules 281e, 292e, 259e and...
The mixer has six mono inputs and one stereo output. Each input has a level and panning adjustment. Moreover, at four inputs the panning can be adjusted manually, and the two remaining ones are CV inputs. Also, the module is equipped with an output for...
Four functional units are combined into one enclosure to create a musical unpredictability or arrange a “source of uncertainty”. There’s a noise generator at the top of the module. It has three outputs: 3 dB / oct - white noise; -3 dB / oct - white noise...
Buchla 251e is represented with four 50-step sequencers. Each of them has independent outputs (pulse and CV) and control inputs (start/stop). The parameters of each sequencer are programmed in series through the SEQ edit and STAGE edit. All the...
Buchla 202h is a true "wand" for the owners of modular systems in the Eurorack format - a set of utilities as the manufacturer entitled it. The module consists of three blocks: ADAPT - a set of adapters (3.5 TRS in 6.35 TRS, TINI-cable, etc.). CV PROC -...
297 module is assembled according to an analog circuit and is not a representative of the "e" family. It represents the classic phase shift effect with advanced tuning and modulation capabilities. The module is divided into seven sections: Input section,...
