c cortirovkoy popularity
Mix Mult consists of two functional units: a three-channel mixer and two signal multipliers. Each mixer channel has its own gain control. Channels 1 and 2 have independent outputs with the function of disconnecting from the mixer, which allows them to be...
The module consists of three independent function blocks: Glide - the limiter (or portamento, or lag-processor). The "TIME" knob adjusts the rise time of the signal.Sample & hold - contains an analog noise generator and a sample&hold circuit. The...
297 module is assembled according to an analog circuit and is not a representative of the "e" family. It represents the classic phase shift effect with advanced tuning and modulation capabilities. The module is divided into seven sections: Input section,...
Updated version of Mirage with non-weighted keyboard, dark grey body, shorter, red stripe on the face, FDD on top.
261e module generates sound by interaction of the two generators (principal and modulation). Principal oscillator generates a sine wave within the range from 27.5 to 7040 Hz. The base wave can be transformed into a more complex one with the help of a...
230e is the reincarnation of the classic Buchla 230. The modern module has an expanded functionality: now it can be used not only as an envelope generator, but also as a preamplifier, or even a three-channel mixer. Three built-in preamps have inputs via...
The Buchla 225h is basically 202h module with the only difference: the "pulse conv" block is replaced with the "MIDI outputs" block. The converter allows you to convert a MIDI signal into control signal (pitch, note on, bend, mod wheel, aftertouch,...
272e module consists of four FM radio stereo transmitters. Each receiver has an independent stereo output and frequency tuning control, which can be changed by CV signals. There is a sample&hold function, also controlled by an external signal. The...
The module is designed as an "extreme" block of the modular system, its purpose is to output the generated synth sound. Outs has two independent inputs, which allows the module to be used not only as a stereo, but as a dual mono. If the signal cable is...
The Buchla 210e is designed for routing control signals and audio signals. The device allows you to reduce the number of patch cables, and the configured combinations of inputs and outputs can be saved in patches. Eight audio inputs can be assigned to...
