c cortirovkoy popularity
The Casio VZ-8M is a synthesizer module released by Casio in 1998. It is a polyphonic, multitimbral synthesizer with a built-in sequencer and effects processor. It is capable of producing a wide range of sounds, from classic analog-style leads and basses...
Oscillator v2 is a compact analog voltage controlled oscillator (VCO). It is built on the same principle as its big brother was. The module is controlled by a 1-volt signal per octave and can play notes within a 5-octave range. A coarse and fine tuning...
There are two high-quality linear VCAs (voltage controlled amplifier) in the module. For each of the VCA, a separate control input with an adjustable attenuator and a passthru are provided. The presence of a mix output allows the module to be used as a two-channel controlled mixer.
The two low-frequency oscillators are combined simultaneously within one housing, each having its own peculiarities. There’s LFO1 at the top of the module. The generation frequency is set by the large "frequency" knob and is indicated by a flashing red...
The Analogue Solutions Vostok Delux is a modular synthesizer system. It consists of a main synthesizer module and several other modules, such as oscillators, filters, envelope generators, and more. It offers a wide range of sounds and can be used for...
The Analogue Solutions Vostok v2 is an analog synthesizer module designed for use in Eurorack modular systems. It features two voltage-controlled oscillators, two envelope generators, a low-pass filter, and a noise generator. It also has a built-in...
The Behringer Pro-1 is a monophonic analog synthesizer released in 2020. It is a modern recreation of the iconic Sequential Circuits Pro-One from the early 1980s. The Pro-1 has two oscillators, a low-pass filter, an envelope generator, an arpeggiator,...
Multiple consists of two identical splitters. The audio or CV signal fed into the splitter is duplicated at the three outputs, and thus one signal can be routed on three different modules. The module does not require power and is small in size (only 2HP).
The module is designed for routing and mixing audio and/or control signals. Each of the four channels can be manually switched by the on/off switch or by the control signal received by the Gate In. The signal sent to the input can be sent to bus A and/or...
The Phase Shifter module is an analogue 16-step phaser. In addition to the output at the sixteenth stage, there’s another mix (dry/wet) is provided after the eight one. In addition, there are outputs after the seventh and fifteenth steps which allow no...
