c direct cortirovkoy by title (AZ)
The four-channel mixer or 4 independent attenuators. Can be used for both audio signals and CV control signals. An independent level controller is provided for each channel. The circuit allows using any of the first three channels as an independent...
The Dreadbox Mixer is a 4-channel analog mixer designed for use with synthesizers, drum machines, and other electronic instruments. It features two stereo inputs, two mono inputs, and a master output. The mixer also includes a headphone output, a cue system, and a three-band EQ.
The Waldorf MOD1 is a synthesizer module designed for use in Eurorack modular systems. It is a monophonic, dual-oscillator analog synth module with a wide range of modulation options, including an LFO, envelope generator, and low-pass filter. The MOD1...
Multiple consists of two identical splitters. The audio or CV signal fed into the splitter is duplicated at the three outputs, and thus one signal can be routed on three different modules. The module does not require power and is small in size (only 2HP).
The Waldorf NW1 is a wavetable synthesizer module from the German company Waldorf. It is a Eurorack-sized module that can be used to create a wide range of sounds. It features a variety of waveforms, modulation sources, and effects, as well as a...
The Dreadbox Oscillator is an analog synthesizer module designed and manufactured by Dreadbox, a Greek synthesizer company. It is a dual-oscillator module with two independent analog oscillators and a sub-oscillator. It features a variety of waveforms,...
Analog Voltage Controlled Oscillator (VCO). Oscillator v1 can produce four sound waves within a five-octave range. Control is carried out according to the standard 1 Volt per octave. For each waveform (sine, triangle, saw, square) an individual output is...
Oscillator v2 is a compact analog voltage controlled oscillator (VCO). It is built on the same principle as its big brother was. The module is controlled by a 1-volt signal per octave and can play notes within a 5-octave range. A coarse and fine tuning...
The module is designed as an "extreme" block of the modular system, its purpose is to output the generated synth sound. Outs has two independent inputs, which allows the module to be used not only as a stereo, but as a dual mono. If the signal cable is...
The Phase Shifter module is an analogue 16-step phaser. In addition to the output at the sixteenth stage, there’s another mix (dry/wet) is provided after the eight one. In addition, there are outputs after the seventh and fifteenth steps which allow no...
