Your search criteria
Available options: Usage Design/ Form Factor: Sound Module
c cortirovkoy cost {most expensive first}
found following products (116):
Dreadbox Echo Analog Delay 110.00 U.S.Dollars
Echo is the delay circuit from Erebus synthesizer.
Dreadbox Filter Voltage Controlled Filter 110.00 U.S.Dollars
The filter is taken from Erebus synthesizer.
Dreadbox LFO Voltage Controlled LFO 110.00 U.S.Dollars
The Dreadbox LFO is a low-frequency oscillator (LFO) module designed for use in Eurorack modular synthesizers. It is a voltage-controlled oscillator that produces a range of waveforms, including sine, triangle, saw, and square. The LFO can be used to...
Dreadbox Dual VCA Dual Logarithmic OTA VCA 110.00 U.S.Dollars
The Dreadbox Dual VCA is a dual voltage-controlled amplifier (VCA) designed for use in Eurorack modular synthesizers. It features two independent VCAs with linear and exponential control curves, a manual level control, and a gate input for each VCA. It...
endorphin.es Shuttle Mate USB MIDI Signal Processing Interface 100.00 U.S.Dollars
The endorphin.es Shuttle Mate is a Eurorack modular synthesizer module designed for live performance and studio use. It is a multi-function module that can be used to create a wide range of sounds and textures. It has two oscillators, two LFOs, a noise...
Dreadbox Envelope Envelope Generator 100.00 U.S.Dollars
ilter?
The Dreadbox Envelope Filter is a voltage-controlled filter effect pedal that is designed to emulate the classic envelope filter sound of vintage synthesizers. It features two separate filter sections, each with its own envelope control, and a...
Pittsburgh Modular Outs Stereo Headphone Amp and Line Outs 99.00 U.S.Dollars
The module is designed as an "extreme" block of the modular system, its purpose is to output the generated synth sound. Outs has two independent inputs, which allows the module to be used not only as a stereo, but as a dual mono. If the signal cable is...
The two low-frequency oscillators are combined simultaneously within one housing, each having its own peculiarities. There’s LFO1 at the top of the module. The generation frequency is set by the large "frequency" knob and is indicated by a flashing red...
InOut is an I/O module for the modular system. In the upper part of the housing there is an output unit. It has two 1/8" inputs and an adjustable 1/4" output jack. This sub-unit can serve to match the output of the modular synthesizer with the line input...
Detect is a small module (6HP) designed to generate control signals from an audio signal. Two CV signals at the output of the block: ENV (envelope signal) and GATE (pulse waveform). For the envelope detector, attack and decay settings are available. The...