225e is designed to convert MIDI commands into Buchla control signals (pulse voltage and CV). The outputs of the converter are combined into control buses. The first four buses (A-D) are internal and serve to control the modules 281e, 292e, 259e and...
Module 223e is designed to process signals coming from an external controller (222e). The controller 222e features 27 velocity sensitive pads. The signal coming from 222e is converted in module 223e into a plurality of separate control signals (CV) and...
The Buchla 210e is designed for routing control signals and audio signals. The device allows you to reduce the number of patch cables, and the configured combinations of inputs and outputs can be saved in patches. Eight audio inputs can be assigned to...
Buchla developers always try to meet all possible user requests. 207e module combined the mixer and an unprecedented for modular synthesizers microphone preamplifier. The mixer is the same as in the 206e model. It has six mono channels with volume and...
The mixer has six mono inputs and one stereo output. Each input has a level and panning adjustment. Moreover, at four inputs the panning can be adjusted manually, and the two remaining ones are CV inputs. Also, the module is equipped with an output for...
Buchla 202h is a true "wand" for the owners of modular systems in the Eurorack format - a set of utilities as the manufacturer entitled it. The module consists of three blocks: ADAPT - a set of adapters (3.5 TRS in 6.35 TRS, TINI-cable, etc.). CV PROC -...
Scatter + Looper = Scooper is a digital processor made by Roland. The module is designed for creating and processing loops in real time. Digital controllers have a resolution of 16 million values, which allows you to fine-tune all the effect parameters....
Demora is flexible digital (24bit/96kHz) delay made by Roland corporation. The module is encased within a metal housing, which can be both mounted into Eurorack and installed into a pedalboard. Two independent mono inputs and outputs allow the processor...
Bitrazer is a digital module combining the bit crush effect with an LP/HP filter. To adjust the effect, bit down control and sample rate are provided. If both these controls are set to the maximum value - the signal will pass through the module with no...
512 DUAL VCOs are represented with two independent voltage controlled oscillators (VCOs) combined in one module. Each oscillator has its own input for the keyboard and two for modulation signals. The inputs are designed for 1V/oct signal. You can switch...
