The Waldorf CMP1 is a compact analog mono synthesizer designed by German musical instrument manufacturer Waldorf. It features two oscillators, an LFO, a low-pass filter, an ADSR envelope, and a ring modulator. The CMP1 is capable of producing a wide...
The Waldorf DVCA1 is a dual-channel, analog voltage-controlled amplifier designed for use in synthesizers and other music production gear. It is capable of producing a wide range of sounds from subtle to extreme, and features a high-gain, low-noise...
Multiple consists of two identical splitters. The audio or CV signal fed into the splitter is duplicated at the three outputs, and thus one signal can be routed on three different modules. The module does not require power and is small in size (only 2HP).
The module is designed for routing and mixing audio and/or control signals. Each of the four channels can be manually switched by the on/off switch or by the control signal received by the Gate In. The signal sent to the input can be sent to bus A and/or...
The Phase Shifter module is an analogue 16-step phaser. In addition to the output at the sixteenth stage, there’s another mix (dry/wet) is provided after the eight one. In addition, there are outputs after the seventh and fifteenth steps which allow no...
