InOut is an I/O module for the modular system.

In the upper part of the housing there is an output unit. It has two 1/8" inputs and an adjustable 1/4" output jack. This sub-unit can serve to match the output of the modular synthesizer with the line input of the studio equipment.

The input section is located at the bottom of the module, has an input 1/4" mono jack and a 1/8" output. There is a sensitivity control and a gain range switch: x25 and x75.

Internal routing is provided, which when 1/4" jacks aren’t busy, allows the unit to pass the signal from the input to the output. In this case, it is possible to achieve an overdrive effect at high gain values.