Synthesizers&KeyboardsSound Module/ Tone GeneratorModular SystemsDrum Machines, Percussion SynthsOtherDJSoftwareSamplers
Electric GuitarsProcessors, Effects, PedalsAmplifiersTuners&metronomes

Catalogue - Pittsburgh ModularList of products sorted by price

Your search criteria

Manufacturer/ Brand: Pittsburgh Modular

c cortirovkoy cost {cheapest first}

found following products (49):

Pittsburgh Modular Multiple
/5 0

  Spliter   29.00 U.S.Dollars

Multiple consists of two identical splitters. The audio or CV signal fed into the splitter is duplicated at the three outputs, and thus one signal can be routed on three different modules. The module does not require power and is small in size (only 2HP).

2.5/5 2

  Audio and Control Voltage Signal Router   69.00 U.S.Dollars

Three convenient mini modules enclosed in one housing. In the upper part is a passive signal propagator. It is represented with four parallel connectors, which allow you to send one signal assigning it into three routings. In the middle and bottom part...

/5 0

  Mixer/ Multiplier   89.00 U.S.Dollars

Mix Mult consists of two functional units: a three-channel mixer and two signal multipliers. Each mixer channel has its own gain control. Channels 1 and 2 have independent outputs with the function of disconnecting from the mixer, which allows them to be...

Pittsburgh Modular Mixer
/5 0

  Mixer   89.00 U.S.Dollars

The four-channel mixer or 4 independent attenuators. Can be used for both audio signals and CV control signals. An independent level controller is provided for each channel. The circuit allows using any of the first three channels as an independent...

Pittsburgh Modular Outs
/5 0

  Stereo Headphone Amp and Line Outs   99.00 U.S.Dollars

The module is designed as an "extreme" block of the modular system, its purpose is to output the generated synth sound. Outs has two independent inputs, which allows the module to be used not only as a stereo, but as a dual mono. If the signal cable is...

Pittsburgh Modular LFO2
/5 0

  LFO2   99.00 U.S.Dollars

The two low-frequency oscillators are combined simultaneously within one housing, each having its own peculiarities. There’s LFO1 at the top of the module. The generation frequency is set by the large "frequency" knob and is indicated by a flashing red...

Pittsburgh Modular InOut
/5 0

  InOut   99.00 U.S.Dollars

InOut is an I/O module for the modular system. In the upper part of the housing there is an output unit. It has two 1/8" inputs and an adjustable 1/4" output jack. This sub-unit can serve to match the output of the modular synthesizer with the line input...

Pittsburgh Modular Detect
/5 0

  Envelope Follower   99.00 U.S.Dollars

Detect is a small module (6HP) designed to generate control signals from an audio signal. Two CV signals at the output of the block: ENV (envelope signal) and GATE (pulse waveform). For the envelope detector, attack and decay settings are available. The...

Pittsburgh Modular ADSR
/5 0

  Four Stage Envelope Generator   99.00 U.S.Dollars

ADSR launched by Pittsburg Modular is a classic envelope generator with four parameters: attack, decay, sustain and release. A two-position switch sets the generator time limit. A red indicator is provided for visualizing the operation of the module. The module is designed in a strict vintage style.

Pittsburgh Modular Toolbox
/5 0

  Slew limiter, Noise, S&H, Inverter   149.00 U.S.Dollars

The module consists of three independent function blocks: Glide - the limiter (or portamento, or lag-processor). The "TIME" knob adjusts the rise time of the signal.Sample & hold - contains an analog noise generator and a sample&hold circuit. The...